The HY80 is a petrol powered self priming centrifugal water pump from Hyundai. Powered by the 212cc Hyundai IC200 4-stroke single cylinder petrol engine the HY80 produces a max output of 6.5hp.

Transferring large volumes of water quickly and effortlessly the HY80 is ideal for domestic, commercial and professional pumping applications.

The HY80 is ideal for flood defence, construction work or use in commercial sectors where large transfers of water are necessary and provides a maximum flow rate of 750 litres per minute, allowing a rapid transfer of large quantities of clean water.

This impressive pumping power is made possible due to the large 3" (80mm) inlet and outlet and is designed to be used primarily in fresh water, capable of processing solid particles up to 9mm in diameter and providing a suction lift of 7m, and a total lift of 25m.

Weighing just 29kg, this is a lightweight water pump which is built with transportation and storage in mind. The sturdy open frame protects the pump from knocks and bumps and also functions as convenient carry handles.

In the box: HY80 Petrol Water Pump, Filter, Spark Plug Spanner & User Manual

Covered by Hyundai 3 year warranty.

Full Specification:

• Gross Weight: (kg) 31.00
• Engine Type: Hyundai IC 200
• Engine Size: (cc) 212.00
• Fuel Tank: (L) 3.60
• Fuel Type: Petrol
• Oil Capacity: (L) 0.60
• Maximum Power: @ 3600rpm (hp/kw) 6.5/4.85
• Drive Type: Direct drive
• Starting Method: Recoil
• Inlet: (inches / mm) 3/80
• Outlet: (inches / mm) 3/80
• Maximum Flow Rate: (L/min) 750.00
• Impeller Type: Cast Iron
• Pump Type: Aluminium Housing
• Total Lift: (m) 25.00
• Suction Lift: (m) 7.00
• Maximum Solids: (mm)* 7.00
• Fully Assembled Dimensions: L x W x H (mm) 520X405X435